OpenSwim Pro doesn't need a phone in the pool. Alongside Bluetooth mode for use on land, it has 32GB of built-in storage — enough for roughly 8,000 songs — so you can load it with music once and swim with it for months without touching a phone again. Here's how to get files onto it, organize them, and keep the storage tidy.
Before You Start
- Storage: 32GB built in
- Supported formats: MP3, FLAC, WAV, AAC, M4A, APE, and WMA
- Battery life in MP3 mode: around 6 hours per charge
- What you'll need: a computer and the magnetic charging cable that came in the box
One thing worth knowing up front: file transfer happens through a computer, not the Shokz app. The app handles device settings and firmware, but moving music files onto OpenSwim Pro is done the same way you'd load files onto any USB storage device.
Connecting OpenSwim Pro to Your Computer
Attach the magnetic charging cable to OpenSwim Pro and plug the other end into your computer. Once connected, your computer should recognize OpenSwim Pro as a removable storage device, the same way it would recognize a USB drive or memory card. If it doesn't show up right away, unplug and reconnect the cable and make sure it's fully seated on the magnetic contacts — a loose connection is the most common reason a device isn't detected.
Adding Music Files
With OpenSwim Pro recognized as a storage device, open it the way you'd open any external drive, and copy your MP3, FLAC, WAV, AAC, M4A, APE, or WMA files across. Copying in a batch is faster than one file at a time if you're loading a full playlist library. Once the transfer finishes and you've safely ejected the device, disconnect the cable — your music is stored locally on OpenSwim Pro and doesn't require a phone or internet connection to play.
Keeping Your Library Organized
Since playback pulls from whatever's stored on the device, it's worth keeping a simple structure — for example, separate folders for different playlists or training sessions — rather than one large unsorted pile of files. This makes it easier to find what you're looking for using the device's on-ear controls, without needing to see a screen.
Freeing Up Space
To remove tracks, reconnect OpenSwim Pro to your computer the same way you did to add files, open it as a storage device, and delete the files you no longer want directly — the same as clearing space on any USB drive. There's no separate "delete" step required inside an app; removing the file from storage is what removes it from the device.
Troubleshooting
My computer isn't detecting OpenSwim Pro.
Reconnect the magnetic cable and check that it's aligned and seated fully against the charging contacts — a slightly offset connection can prevent both charging and data transfer. Trying a different USB port on your computer can also help rule out a port-specific issue.
A file I added isn't showing up in playback.
Double-check the file format is one of the supported types (MP3, FLAC, WAV, AAC, M4A, APE, or WMA). Files outside that list may copy onto the device but won't be recognized for playback.
I'm running low on storage.
With 32GB on board, that's typically thousands of songs before space becomes a concern — but if you do fill it, connect to your computer and remove older or unused tracks the same way you'd clear space on any drive.
The Takeaway
MP3 mode is what makes OpenSwim Pro genuinely phone-free in the pool: load your library once over a wired connection, and you've got up to 6 hours of local playback per charge with no Bluetooth or phone required. Managing it is as simple as treating it like any other USB storage device.